Easy steps to clean your vacuum cleaner

You have one of the Best Rated Vacuum Cleaners: The Best for Cleaning and use it to clean the house. But you don’t know how to clean your vacuum cleaner? If the vacuum cleaner is not clean, the cleaning task is not effective as you wish.

Follow our guide below to clean the vacuum!

First step: Clean the canister

You think, you just need to empty your dust canister, and you are safe. No, it is not enough. If you check it carefully, you will see a lot of grime inside. Grime builds up inside it over time. You or someone in your family are allergy sufferers, grime inside dust canisters still can affect the health.

So, how to clear out all grime inside in a quick and easy way? Use your dishwasher and everything is done.

After emptying the dust canister, put it in the bottom rack of your dishwasher. Don’t put it on the upper level. Then, start the dishwasher as you wash dishes. You just need to set a timer for 3 minutes. When time goes off, open your dishwasher and check. If the canister is still not clean, start the wash cycle again, but you should turn the canister over. Remember to protect delicate parts of the canister by limiting exposure to hot water in the dishwasher.

Finally, bring it out, dry completely.

The second step: Wash the filters

Filters are very essential and important. If vacuum cleaners don’t have good filters, they can’t make cleaning effectively. Their filters can be washable, but some of them are not.

If you have a vacuum with washable foam filters, you can remove dust and dirt by putting it in the dishwasher and rinse them. Let it dry completely before you replace it in a vacuum.

However, most vacuums from top vacuum cleaner brands are equipped with HEPA filters. HEPA filters are not washable. You need to check the time to replace it.

The third step: Clean the hose

Water and baking soda, white vinegar is what you need to clear out the hose. Dirt and grime are easy to get stuck in nooks and crannies of vacuum hoses. To clear out, you have to remove the hose from the vacuum. Use hot water to rinse out loose dirt. Then you sprinkle baking soda (about ½ cup) into the hose, shake the hose for baking soda to coat the inside of the hose. The next step is to pour two cups of white vinegar. It is not necessary to shake again. Just let it sit until it stops fizzing.

Rinse the hose with hot water again. Dry it by hanging it up somewhere.

The fourth step: Clear the brush roll

When we read Vacuum Cleaner Reviews, we realized many people have difficulty in checking the vacuum’ brush out. Yes, it is not easy to clean it completely. Pet hair, human hairs get wrapped around the brush. You have to remove them. If not, your vacuum cleaner doesn’t work effectively.

You just lean the vacuum back to check the brush then cut them to remove. You should use a seam ripper to cut them more easily.

Cleaning your vacuum cleaner is essential. But you have to remember to dry every part of the vacuum completely before you put them back into their place. If they are still damp, mold and mildew will grow. You even have trouble with electrical problems although you have one of the Best Rated Vacuum Cleaners.